The sketch runs automatically when the Nano is powered up. Includes ready to use custom camera (USB) cable, battery case (6 AAA), one all-metal-gear standard servo (tilt) and one continuous rotation servo (pan).ĭetailed instructions for soldering, configuring, and using the SkyShield are available (see below).īoth the kit and assembled SkyShield include an Arduino Nano compatible microcontroller which is loaded with a sketch. Soldered SkyShield with cables, battery case and servos $95 - A ready to fly SkyShield controller including an Arduino Nano compatible microcontroller.No cables, servos, or battery case included. Soldered SkyShield $80 - A ready to fly SkyShield controller including an Arduino Nano compatible microcontroller.Includes materials for making a USB cable (e.g., for PowerShot cameras), attaching a connector to a battery case, and two ready-to-connect micro servos - one standard and one continuous rotation. SkyShield Kit, cables and servos $75 - All the components to solder together the autoKAP controller including a Nano.Includes materials for making a USB cable (e.g., for PowerShot cameras) and attaching a connector to a battery case for 6 AAA. SkyShield Kit with cables $60 - All the components to solder together the autoKAP controller including a Nano.No cables, servos, or power supply included. About a dozen components must be soldered to the custom PCB. SkyShield Kit $50 - All the components to solder together the autoKAP controller including an Arduino Nano compatible microcontroller.The SkyShield is available in kit form (requires soldering) or as a ready to fly unit. Packages with both the Saturn V Rig and the SkyShield controller are available. The Saturn V Rig is designed to be operated by a SkyShield controller for capturing multiple aerial photos to be stitched into panoramas. The SkyShield is open-source, and the circuit and software are available at the Guides page. The SkyShield is a through-hole circuit board so anyone can solder one together from an inexpensive kit of components. The dimensions of the SkyShield with Nano are 18 mm x 43 mm x 23 mm (see photos) and it weighs 16 grams. It is easy to load your custom Arduino sketch onto the Nano. For non-aerial photography, a tripod mounted rig could capture many telephoto shots for stitching into gigapixel panoramas (like a Gigapan imager). Cameras can be triggered by a pulse to the USB port (cable included), IR remote signal (additional hardware required), or servo button push (additional hardware required). For aerial photography it can take systematic photos for structure-from-motion 3D modeling, or instruct two (or more) cameras to shoot simultaneously, for example for visible and near infrared photo pairs for vegetation analysis. With certain connected cameras (e.g., a CHDK-enabled PowerShot, not included) you can capture aerial photos to stitch into high resolution panoramas or just take lots of photos in all directions.Īlthough the primary intended use of the SkyShield is to take aerial photos which can be stitched together into panoramas, it can also do other things. A sketch (program) loaded on the Nano defines eight different regimes of pan/tilt/shoot sequences, and any regime can be selected in the field using a DIP switch on the shield. When coupled with a Nano, the SkyShield allows easy connection of cameras, servos, and a battery pack using RC connectors. The Arduino Nano is a tiny microcontroller that can be easily programmed to send signals to connected devices. It is an open-source custom circuit board which is a "shield" for an Arduino Nano. The SkyShield will point and shoot an airborne camera to systematically capture a grid of photos for stitching into panoramas.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |